hub.c: new USB device 00:1d.2-1, assigned address 2
scsi2 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 1471
  Vendor: eUSB      Model: Compact Flash     Rev: 5.06
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
sda: Unit Not Ready, sense:
Current 00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
sda : block size assumed to be 512 bytes, disk size 1GB.  
 sda: I/O error: dev 08:00, sector 0
 I/O error: dev 08:00, sector 0
 unable to read partition table
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
scsi singledevice 2 0 0 1
  Vendor: eUSB      Model: SmartMedia        Rev: 5.06
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
sdb: Unit Not Ready, sense:
Current 00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
usb-uhci.c: interrupt, status 3, frame# 398
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
sdb : block size assumed to be 512 bytes, disk size 1GB.  
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
scsi singledevice 2 0 0 2
scsi singledevice 2 0 0 3
scsi singledevice 2 0 0 4
scsi singledevice 2 0 0 5
scsi singledevice 2 0 0 6
sda: Unit Not Ready, sense:
Current 00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
usb-uhci.c: interrupt, status 3, frame# 967
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
sda : block size assumed to be 512 bytes, disk size 1GB.  
sda: test WP failed, assume Write Enabled
 sda: I/O error: dev 08:00, sector 0
 I/O error: dev 08:00, sector 0
 unable to read partition table
Device not ready.  Make sure there is a disc in the drive.
 I/O error: dev 08:00, sector 0
Device not ready.  Make sure there is a disc in the drive.
sdb: Unit Not Ready, sense:
Current 00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 08 
Current sd00:00: sns = 70  2
ASC=3a ASCQ= 0
Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
sdb : block size assumed to be 512 bytes, disk size 1GB.  
sdb: test WP failed, assume Write Enabled
 sdb: I/O error: dev 08:10, sector 0
 I/O error: dev 08:10, sector 0
 unable to read partition table
Device not ready.  Make sure there is a disc in the drive.
 I/O error: dev 08:10, sector 0
Device not ready.  Make sure there is a disc in the drive.